CMM PROGRAMMER - 2nd Shift 12:00pm - 9:00pm

Job Summary:

Specific Responsibilities

Advanced programing skill using a Global (Hexagon) CMM (PC-DMIS) and validates them in accordance with customer specification. Assists manufacturing engineering with part inspection problems.

Reads blueprints or engineering specifications to obtain product information, such as specified material, surface finish, and dimensions. Calculate blueprint dimensions.

Compares surface finish of work piece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish.

Measures dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator, and snap gauge, to ensure product meets specifications.

Locates reference point on part and measures dimension such as angle, arc, and radii, using combinations of aids, such as surface plate parallel bars, angle plates, gauge blocks, V blocks, sine bars, and precision measuring instrument.

Performs first article, in-process and final inspections. Ensures that only acceptable product moves to the next operation and\or shipped. Ensures that all products have passed all inspection, test requirements, and that appropriate records are maintained.

Ensure that any product that fails any portion of the detailed inspection plan or test requirements are communicated, tagged, and appropriate records are maintained.

Reports findings to their Manager and works with appropriate functional areas to resolve discrepancies.

Verifies Quantity, Customer Part Number and Revision to the PO, MOT, and Blueprint

Responsible for Day to Day Planning of Product through the Department.

Responsible for visually inspecting parts for FOD and other handling abuse.

Prepares FAIR\DIP (First Article Inspection Report\Detailed Inspection Plan) and bubbles blue print.

Possesses a thorough understanding of understanding of the ballooning software DISCUS.

Substitutes known values, such as dimensions from blueprints into standard formulas and solves for unknown quantities using knowledge of algebra, trigonometry, or geometry to determine dimensions not specified in blueprints.

(May) Calibrate in-house equipment and\or schedule for the calibrated equipment to be outsource.

(May) Maintains calibration equipment list, records of calibration results, and reports discrepancies to management.

(May) Sets up and tries out inspection equipment to ensure accuracy.

(May) Substitutes known values, such as dimensions from blueprints into standard formulas and solves for unknown quantities using knowledge of algebra, trigonometry, or geometry to determine dimensions not specified in blueprints.

(May) Tests hardness of work piece surface, using hardness testing machine.

The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws.

Each Martinic Engineering employee, as applicable to their particular work area and in accordance with the Quality Policy, has the additional duty and responsibility to:

• Identify and document any quality related problems.

• Inform management of the situation through designated organizational

• Channels.

• Recommend, initiate or provide solutions to the problems through the

• Corrective and preventive action program.

• Verify that the proper corrective and/or preventative action to the problem is

• Implemented by management

• Control further production, processing, or delivery of a product until a quality

• Defect is corrected or resolved by management.

• Adhere to company QMS documented procedures\process and report changes through our Document Change Request process.

• Report to management any training needs identified.

• Provide a venue for continuous improvement.