About This Career Path
Lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems.
Applied Technology
Lay out, assemble, install, or maintain pipe systems, pipe supports, or related hydraulic or pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, or industrial production or processing systems.
Pipe Fitters and Steamfitters
Average
$48,490
ANNUAL
$23.31
HOURLY
Entry Level
$37,040
ANNUAL
$17.81
HOURLY
Mid Level
$47,795
ANNUAL
$22.98
HOURLY
Expert Level
$58,550
ANNUAL
$28.15
HOURLY
Pipe Fitters and Steamfitters
Pipe Fitters and Steamfitters
Pipe Fitters and Steamfitters
01
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
02
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints.
03
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
04
Measure and mark pipes for cutting or threading.
05
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
06
Plan pipe system layout, installation, or repair, according to specifications.
07
Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
08
Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools.
09
Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
10
Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools.
Pipe Fitters and Steamfitters
Common knowledge, skills & abilities needed to get a foot in the door.
KNOWLEDGE
Mechanical
KNOWLEDGE
Building and Construction
KNOWLEDGE
Design
KNOWLEDGE
Mathematics
KNOWLEDGE
English Language
SKILL
Critical Thinking
SKILL
Time Management
SKILL
Reading Comprehension
SKILL
Active Listening
SKILL
Speaking
ABILITY
Arm-Hand Steadiness
ABILITY
Manual Dexterity
ABILITY
Control Precision
ABILITY
Near Vision
ABILITY
Oral Comprehension
Pipe Fitters and Steamfitters
**Hiring Structural Welders**
Phoenix
$19-$20/hour
Lots of OT available
**Description:**
Will be fabricating structural steel, which is heavy grade steel. Will be doing flux core dual shield welding and welding with thick 332 wire. Must be able to read a tape measure to 1/16" of an inch, able to read shop drawings and weld symbols along with having a strong knowledge of common welding shop tools. Fitters will be reading the blueprints all the welders have to do is read the weld symbols.
**Skills:**
flux core, welding, industrial welding, fabrication
**Top Skills Details:**
Flux Core wire
structural steel experience
fabrication
**Additional Skills & Qualifications:**
3 years of structural welding experience is preferred but not required
1 year of Flux core experience is preferred
**Experience Level:**
Entry Level
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
**Description:**
- Joins, fabricates, and repairs metals and other weldable materials by applying appropriate welding techniques. (3/4" - 1/4" tube and u pto 1" plates)
- Responsible for performing Gas Metal Arc Welding (MIG) and Gas Tungsten Arc Welding (TIG) on a diversified line of products which include close tolerance, large and small weldments in accordance with the appropriate (AWS) welding codes and symbols.
- fit up of the parts
**Skills:**
Mig welder, Tig, Mig, Fabrication, Weld, Blueprint, Welding, Stainless steel, Tig welding, Fcaw, Mig welding, Wire feed, Carbon steel, Plasma cutting
**Top Skills Details:**
MIG Welding / TIG welding
Blueprint reading / welding symbols
stainless steel / mild steel metal
**Additional Skills & Qualifications:**
• 2+ years of experience in welding • High School diploma or equivalent experience. • Strong understanding of TIG / MIG welding procedures & processes. • Must have experience working with carbon steel, aluminum, and stainless steel. •
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
*****Welder Needed $20-$24 hr Scottsdale, AZ*****
Will be fabricating structural steel, which is heavy grade steel. Will be doing flux core dual shield welding and welding with thick 332 wire. Must be able to read a tape measure to 1/16" of an inch, able to read shop drawings and weld symbols along with having a strong knowledge of common welding shop tools. Fitters will be reading the blueprints all the welders have to do is read the weld symbols.
Job Duties:
+ Layout, position, align and fit components together. Bolt, clamps and tack welds parts to secure proper positioning for welding. Set ups equipment and welds parts.
+ Assemble parts by welding and riveting methods, must be able to square and level structures.
+ Perform tasks such as welding, cutting, grinding on plate and structural.
+ Repair or modify products through dismantling, straightening, reshaping and reassembly.
Job Qualifications:
+ 1 year FCAW welding in fabrication shops is a must.
+ 3 years of structural welding experience is preferred but not required.
Shift: 1st
+ Candidates must be able to work 1st shift
**If you meet the minimum the requirements of the position please text 707-413-0107 me or email me your resume to jlopez80@aerotek.com**
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
**Description:**
Candidates will be MIG welding light gauge steel and aluminum for pre-assembled commercial building structures. Some of the material will be zinc coated. They will be welding with either .035 or .04 size wire.
**Skills:**
welder, mig, steel, light gauge
**Top Skills Details:**
MIG, welder, steel
**Additional Skills & Qualifications:**
Experience with reading blue prints. Familiarity with working in a shop environment.
Ability to lift up to 50lbs on a consistent basis.
**Experience Level:**
Entry Level
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
Requisition #:17120
Shift : 2
Start Time : 2:00 pm
End Time : 10:30 pm
Schedule Days : Monday - Friday
Position Status: Full Time (40 hrs week)
Job Summary:
Repair and/or rebuild structurally failed or worn parts requiring welding process reconstruction. Work in adverse weather and other adverse shop and field situations presented by customer needs. Accept all out of town assignments requiring overnight stays. Communicate orally and in writing information, instructions, and explanations to associates, customers, and management regarding conditions, problems, and recommendations.
Experience with structural repair and restoration of large components, occasionally over 20,000 pounds is highly desirable. Prior experience with shop and/or field machining practices and processes are also highly desirable. Ideal candidate should have sufficient experience with a variety of weld-repair processes including: sub-arc (SAW), FCAW (gas-shielded flux cored wires), GMAW (solid MIG wire), GTAW (TIG), brazing, soldering, pre-heating, post-heating, and stress-relieving. Experience repairing low-alloy carbon steel, medium-alloy steel, cast iron, and aluminum are highly desirable.
Essential Functions:
Additional Responsibilities:
Knowledge Skills and Abilities:
Education and Experience:
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Disclaimer:
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. The roles and objectives of this job do not include setting corporate policy, and does not constitute a managing agent of the company.
Empire is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call 480-633-5440 and let us know the nature of your request and your contact information.
Empire Southwest is an EEO/Affirmative Action Employer
Safety - Respect - Integrity - Teamwork - Excellence - Stewardship - Astonishment
Full Time
**Description:**
Will be fabricating structural steel, which is heavy grade steel. Will be doing flux core dual shield welding and welding with thick 332 wire. Must be able to read a tape measure to 1/16" of an inch, able to read shop drawings and weld symbols along with having a strong knowledge of common welding shop tools. Fitters will be reading the blueprints all the welders have to do is read the weld symbols.
Duties include:
Layout, position, align and fit components together. Bolt, clamps and tack welds parts to secure proper positioning for welding. Set ups equipment and welds parts.
Assemble parts by welding and riveting methods, must be able to square and level structures.
Perform tasks such as welding, cutting, grinding on plate and structural.
Repair or modify products through dismantling, straightening, reshaping and reassembly.
**Skills:**
Weld, Blueprint, Welding, Flux core, Mig welder, Grind, Fabrication
**Additional Skills & Qualifications:**
3 years of structural welding experience is preferred but not required
1 year of Flux core experience is preferred
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
**Details:** ****
**First Shift (Open Positions)**
Schedule: 5:00 A.M. Until 1:30 P.M.
Monday through Friday (Overtime and weekends as required to meet production goals)
Pay: Varies depending on experience
**Skills and Responsibilities:**
+ Assemble materials to build wall and floor panels using framing tables, jigs, clamps and other tools.
+ Weld to various structural job specific detail requirements. Typical material includes 10-20 gauge galvanized steel.
+ Ability to build box frames and keep all sides square
+ Ability to weld in tight spaces
+ Ability to lift and move heavy components throughout the day
+ Ability to work as a team and drive for quality and daily production goals.
+ Good communication skills
+ Ability to weld to consistent size welds (typically 3/4” - 1”)
+ Ability to adjust settings on weld machines to meet various steel requirements
+ Ability to read basic weld details and comprehend blueprints
+ Work under area leads and shop manager to carry out various tasks throughout the fabrication plant.
+ Ability to follow directions, ask appropriate questions and show a desire to learn.
+ Work with quality control, leads and peers to ensure the highest quality and understanding of maintaining a quality product.
+ Work under direction to make structural repairs as needed to parts.
+ Achieve production goals set while meeting all quality expectations.
+ Continual training as needed to improve welding and assembly procedures.
+ Help create and maintain a positive, respectful and productive team, area and company.
+ Follow all policies including but not limited to: Attendance, Safety, Food and drink, equipment handling and all others
+ Shop maintenance and cleaning as needed and instructed.
+ Maintain and provide a clean and organized work environment.
+ Flexibility to work overtime to meet production schedules.
+ Crosstrain and assist in various areas and job functions outside of welding.
**About Aerotek:**
We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Full Time
1501 S Euclid Ave Tucson Arizona 85713
**_Why Valmont_**
Welcome to Valmont, where a world of opportunity awaits. When you join our team, you become part of a passionate group dedicated to changing lives and conserving resources around the globe. We want problem solvers who roll up their sleeves to foster progress and innovation for all people. At Valmont, we provide infrastructure, irrigation, tubing and coatings to the world. We strengthen cities. We nourish croplands. We design, manufacture and coat. Our products and services make a difference. Join us, and **BUILD YOUR WORLD.**
**A Brief Summary of This Position**
The incumbent is responsible for welding metal components together to fabricate or repair products according to layouts, blueprints, or work orders using brazing and a variety of arc and gas welding equipment.
**Essential Functions**
+ Fuse or weld metal components together by means of arc welding
+ Perform welding operations requiring a limited amount of planning or work from blueprints or other written specifications and determining operation sequence
+ Utilize all safety devices and wear all mandatory personal protective safety equipment
+ Adjust welding equipment to its prescribed settings
+ Maintain and operate production tooling and fixtures as well all welding equipment in a safe and secure manner
+ Read and complete labor reporting system, standard shop forms, and blueprints
+ Performs minor welding machine maintenance (i.e. tips, liners, gas cups)
+ Uses labor reporting system, routing shop forms, and fills out move tags
**Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities)**
+ One month of previous hands-on welding experience in a professional environment
+ The ability to accurately read a measuring tape
+ The ability to read and follow written and verbal instructions
+ The ability to communicate and interact with coworkers in a positive manner
+ The ability to work in a high volume, fast paced environment
+ The ability to pass on onsite welding assessment
+ The ability to work over ten hours a week in overtime when required for business needs
**Highly Qualified Candidates Will Also Possess These Qualifications**
+ High School Diploma or GED equivalent
+ One year of previous experience in a manufacturing or fabrication environment
+ American Welding Society (AWS) welding certification from a recognized school
+ Six months of previous hands-on welding experience in a professional environment
+ The ability to read and interpret blue prints correctly without assistance
+ High awareness for safety at all times
+ The ability to identify and communicate maintenance or product problems to departmental supervision
+ Passion and integrity and the drive to excel and deliver exceptional results
Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
If you have a disability and require any assistance in filling out the application for employment email EEOCompliance@Valmont.com.
Valmont Industries, Inc. is a leading producer and distributor of products and services for the infrastructure and agricultural markets.
Valmont began in 1946 when founder, Robert B. Daugherty, combined his $5,000 savings with a wholehearted belief that business could and should be done better. From those modest beginnings, the company grew into a global leader of engineered products and services for infrastructure, and water-conserving irrigation equipment and solutions for agriculture.
From lighting and traffic structures to guide the way, to communication towers that keep people connected, to utility structures that power homes and businesses, to irrigation equipment and technology that helps grow the world’s food, we are committed to _Conserving Resources. Improving Life_ _®_ .
Four primary business segments comprise Valmont: Engineered Support Structures; Coatings; Irrigation and Utility Support Structures. We manufacture products in over 80 different facilities spread across 6 continents and do business in over 22 different countries. Valmont is publicly traded on the NYSE under the symbol (VMI).
We are passionate about our products. We pride ourselves on being people of integrity who excel at delivering results. We pursue opportunities for growth by taking products and processes to new markets, developing new products for existing markets, and continually improving across the company to ensure that Valmont solutions are always the global industry leader.
Full Time
Location:
6112 N 56th Ave, Glendale, Arizona 85301 United States of America
Are you an experienced welder looking to take your career to the next level? Apply now to become U-Haul’s newest Welder and experience U-Haul’s excellent benefits and supportive company culture in this rewarding role.
*This position is 40 hours a week with the possibility of going permanent Full Time*
Welder Primary Responsibilities:
+ Perform all-position MIG welding to join steel and aluminum metals from 1/16”- to 1”-thick plate
+ Interpret and carry out work orders, blueprints, sketches, and verbal instructions
+ Properly clamp parts into jigs or holding fixtures
+ Clean burrs, spatter, and weld flux from assemblies
+ Hand count material for inventory purposes
+ Follow all safety practices during assembly/production and wear proper protective equipment at all times
+ Clean and organize workstation
We have multiple shifts!! Hours (subject to change according to needs of ongoing projects):
+ 1st shift 5 am - 1 pm
+ 2nd shift 1 pm - 9 pm
+ 3rd Shift 9 pm - 5 am
Welder Minimum Qualifications:
+ Successfully complete plant-administered welding test
+ Pass print reading, measurement, and fraction/decimal conversion tests
+ High degree of mechanical aptitude
+ Operate a cutting torch and various hand tools
+ Able to responsibly handle confidential information
Work Environment:
The work involves moderate risks or discomforts which require special safety precautions, e.g. working around moving parts, machines, fumes, or irritant chemicals. May be required to use protective clothing, or gear such as masks, goggles, gloves, or shields.
AMERCO and its family of companies, including U-Haul, have strived to create a culture of health and wellness. As of February 1, 2020, and consistent with applicable state law, no AMERCO or U-Haul company will hire individuals in states where it may lawfully decline to hire individuals who use nicotine products. By continuing with this application, you are indicating that, if hired, you consent to nicotine screening in the future. This policy will not apply to team members hired before February 1, 2020.
U-Haul is an equal opportunity employer. All applicants for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.
Since 1945, U-Haul has been serving do-it-yourself movers and their households. Like many other successful ventures, the concept for U-Haul was generated out of need. After World War II, there existed the widespread need for do-it-yourself moving equipment that would be available on a one-way, nationwide basis. U-Haul co-founders L.S. "Sam" Shoen and his wife, Anna Mary Carty Shoen, recognized that need and acted upon it. Their visionary approach spread the cost of ownership among many users, facilitating the mobility of the populations of the U.S. and Canada. The covered wagon of the pioneers morphed into orange U-Haul trailers. In the process, an industry was born.
Full Time
Schuff Steel (http://www.schuff.com/) (a subsidiary of DBM Global (http://www.dbmglobal.com/) ), the largest steel fabrication & erection company in the US, is looking to hire a Welder. We are looking for the right professional to join our growing organization. This position offers high-visibility, growth opportunities, and exciting builds (previous clients include Apple (http://www.schuff.com/project/apple-corporate-headquarters/?portfolioCats=38%2C83%2C40%2C39%2C42%2C43%2C73%2C41%2C84) , State Farm Stadium (http://www.schuff.com/project/university-phoenix-stadium/?portfolioCats=38%2C83%2C40%2C39%2C42%2C43%2C73%2C41%2C84) , and Facebook (http://www.schuff.com/project/facebook-mpk-21/?portfolioCats=38%2C83%2C40%2C39%2C42%2C43%2C73%2C41%2C84) ).
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel Production Welder brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the production process this position welds a large variety of materials by FCAW, SMAW, GMAW and SAW. The production welder welds in all positions utilize a high degree of proficiency while utilizing full skills of the trade including knowledge of common heat reactions of structural metals and is certifiable. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Follows applicable welding procedures (AWS, AISC)
+ Welds on the ground level, above ground and below ground, in any required position.
+ Chips peens and grinds material to prepare for welding or finish.
+ Welds structural, bridge and industrial materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.
+ Perform gouging and scarfing as needed.
+ Capable of passing welding tests in accordance to AWS D1.1.
+ Transport material by a crane as needed and required.
+ Keeps work area organized and clean.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test.
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – variety of hand tools and welding equipment
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Applied Technology
Not sure where to begin?
Career Exploration